dmesg - AMD Phenom II X2 550
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 4.1.31-30-default (geeko@buildhost) (gcc version 4.8.5 (SUSE Linux) ) #1 SMP PREEMPT Wed Aug 24 06:20:09 UTC 2016 (de9ddf8)
tseg: 0000000000
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009f3ff] usable
BIOS-e820: [mem 0x000000000009f400-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e6000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000007ffaffff] usable
BIOS-e820: [mem 0x000000007ffb0000-0x000000007ffbdfff] ACPI data
BIOS-e820: [mem 0x000000007ffbe000-0x000000007ffdffff] ACPI NVS
BIOS-e820: [mem 0x000000007ffe0000-0x000000007ffedfff] reserved
BIOS-e820: [mem 0x000000007fff0000-0x000000007fffffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000ff700000-0x00000000ffffffff] reserved
NX (Execute Disable) protection: active
SMBIOS 2.5 present.
DMI: BIOSTAR Group TA790GX 128M/TA790GX 128M, BIOS 080014 05/25/2009
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
AGP: No AGP bridge found
e820: last_pfn = 0x7ffb0 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-EFFFF uncachable
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 disabled
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000099000] 99000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x0221b000, 0x0221bfff] PGTABLE
BRK [0x0221c000, 0x0221cfff] PGTABLE
BRK [0x0221d000, 0x0221dfff] PGTABLE
init_memory_mapping: [mem 0x7fc00000-0x7fdfffff]
[mem 0x7fc00000-0x7fdfffff] page 2M
BRK [0x0221e000, 0x0221efff] PGTABLE
init_memory_mapping: [mem 0x60000000-0x7fbfffff]
[mem 0x60000000-0x7fbfffff] page 2M
init_memory_mapping: [mem 0x40000000-0x5fffffff]
[mem 0x40000000-0x5fffffff] page 2M
init_memory_mapping: [mem 0x00100000-0x3fffffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x3fffffff] page 2M
init_memory_mapping: [mem 0x7fe00000-0x7ffaffff]
[mem 0x7fe00000-0x7ffaffff] page 4k
BRK [0x0221f000, 0x0221ffff] PGTABLE
RAMDISK: [mem 0x36ede000-0x37766fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000FA6B0 000014 (v00 ACPIAM)
ACPI: RSDT 0x000000007FFB0000 00003C (v01 052509 RSDT1540 20090525 MSFT 00000097)
ACPI: FACP 0x000000007FFB0200 000084 (v01 052509 FACP1540 20090525 MSFT 00000097)
ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20150410/tbfadt-654)
ACPI: DSDT 0x000000007FFB0490 009D7B (v01 78DEA 78DEA525 00000000 INTL 20051117)
ACPI: FACS 0x000000007FFBE000 000040
ACPI: APIC 0x000000007FFB0390 00006C (v01 052509 APIC1540 20090525 MSFT 00000097)
ACPI: MCFG 0x000000007FFB0400 00003C (v01 052509 OEMMCFG 20090525 MSFT 00000097)
ACPI: OEMB 0x000000007FFBE040 000072 (v01 052509 OEMB1540 20090525 MSFT 00000097)
ACPI: HPET 0x000000007FFBA210 000038 (v01 052509 OEMHPET 20090525 MSFT 00000097)
ACPI: SSDT 0x000000007FFBA250 000458 (v01 A M I POWERNOW 00000001 AMD 00000001)
ACPI: Local APIC address 0xfee00000
Scanning NUMA topology in Northbridge 24
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000007ffaffff]
NODE_DATA(0) allocated [mem 0x7ff9c000-0x7ffaffff]
[ffffea0000000000-ffffea0001ffffff] PMD -> [ffff88007d600000-ffff88007f5fffff] on node 0
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x000000007ffaffff]
Normal empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009efff]
node 0: [mem 0x0000000000100000-0x000000007ffaffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000007ffaffff]
On node 0 totalpages: 524110
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3998 pages, LIFO batch:0
DMA32 zone: 8127 pages used for memmap
DMA32 zone: 520112 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8300 base: 0xfed00000
smpboot: Allowing 4 CPUs, 2 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000e5fff]
PM: Registered nosave memory: [mem 0x000e6000-0x000fffff]
e820: [mem 0x80000000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 33 pages/cpu @ffff88007fc00000 s97368 r8192 d29608 u524288
pcpu-alloc: s97368 r8192 d29608 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Node order, mobility grouping on. Total pages: 515898
Policy zone: DMA32
PID hash table entries: 4096 (order: 3, 32768 bytes)
AGP: Checking aperture...
AGP: No AGP bridge found
AGP: Node 0: aperture [bus addr 0x1538000000-0x1539ffffff] (32MB)
Aperture beyond 4GB. Ignoring.
Memory: 2035424K/2096440K available (6569K kernel code, 1085K rwdata, 4856K rodata, 1560K init, 1520K bss, 61016K reserved, 0K cma-reserved)
Preemptible hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
NR_IRQS:33024 nr_irqs:456 16
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-3.
spurious 8259A interrupt: IRQ7.
Console: colour dummy device 80x25
console [tty0] enabled
clocksource hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3410.180 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6820.36 BogoMIPS (lpj=13640720)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20150410
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
AppArmor: AppArmor initialized
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
Initializing cgroup subsys blkio
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
LVT offset 0 assigned for vector 0xf9
process: using AMD E400 aware idle routine
Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
Freeing SMP alternatives memory: 24K (ffffffff82097000 - ffffffff8209d000)
ftrace: allocating 25031 entries in 98 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: AMD Phenom(tm) II X2 550 Processor (fam: 10, model: 04, stepping: 02)
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
x86: Booting SMP configuration:
.... node #0, CPUs: #1
x86: Booted up 1 node, 2 CPUs
smpboot: Total of 2 processors activated (13640.72 BogoMIPS)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0x7ffbe000-0x7ffdffff] (139264 bytes)
clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
pinctrl core: initialized pinctrl subsystem
RTC time: 6:58:40, date: 09/25/16
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
node 0 link 0: io port [1000, ffffff]
TOM: 0000000080000000 aka 2048M
Fam 10h mmconf [mem 0xe0000000-0xefffffff]
node 0 link 0: mmio [a0000, bffff]
node 0 link 0: mmio [80000000, dfffffff]
node 0 link 0: mmio [e0000000, efffffff] ==> none
node 0 link 0: mmio [f0000000, ffefffff]
bus: [bus 00-07] on node 0 link 0
bus: 00 [io 0x0000-0xffff]
bus: 00 [mem 0x000a0000-0x000bffff]
bus: 00 [mem 0x80000000-0xdfffffff]
bus: 00 [mem 0xf0000000-0xfcffffffff]
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 5 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150410/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20150410/hwxface-580)
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0x80000000-0xdfffffff window]
pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff window]
pci 0000:00:00.0: [1022:9600] type 00 class 0x060000
pci 0000:00:03.0: [1022:960b] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: System wakeup disabled by ACPI
pci 0000:00:07.0: [1022:9607] type 01 class 0x060400
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: System wakeup disabled by ACPI
pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f
pci 0000:00:11.0: reg 0x10: [io 0xb000-0xb007]
pci 0000:00:11.0: reg 0x14: [io 0xa000-0xa003]
pci 0000:00:11.0: reg 0x18: [io 0x9000-0x9007]
pci 0000:00:11.0: reg 0x1c: [io 0x8000-0x8003]
pci 0000:00:11.0: reg 0x20: [io 0x7000-0x700f]
pci 0000:00:11.0: reg 0x24: [mem 0xfe8ff800-0xfe8ffbff]
pci 0000:00:11.0: set SATA to AHCI mode
pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:12.0: reg 0x10: [mem 0xfe8fe000-0xfe8fefff]
pci 0000:00:12.0: System wakeup disabled by ACPI
pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310
pci 0000:00:12.1: reg 0x10: [mem 0xfe8fd000-0xfe8fdfff]
pci 0000:00:12.1: System wakeup disabled by ACPI
pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:12.2: reg 0x10: [mem 0xfe8ff000-0xfe8ff0ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:12.2: System wakeup disabled by ACPI
pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:13.0: reg 0x10: [mem 0xfe8fc000-0xfe8fcfff]
pci 0000:00:13.0: System wakeup disabled by ACPI
pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310
pci 0000:00:13.1: reg 0x10: [mem 0xfe8fb000-0xfe8fbfff]
pci 0000:00:13.1: System wakeup disabled by ACPI
pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:13.2: reg 0x10: [mem 0xfe8fa800-0xfe8fa8ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.2: System wakeup disabled by ACPI
pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a
pci 0000:00:14.1: reg 0x10: [io 0x0000-0x0007]
pci 0000:00:14.1: reg 0x14: [io 0x0000-0x0003]
pci 0000:00:14.1: reg 0x18: [io 0x0000-0x0007]
pci 0000:00:14.1: reg 0x1c: [io 0x0000-0x0003]
pci 0000:00:14.1: reg 0x20: [io 0xff00-0xff0f]
pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
pci 0000:00:14.2: reg 0x10: [mem 0xfe8f4000-0xfe8f7fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.2: System wakeup disabled by ACPI
pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
pci 0000:00:14.4: System wakeup disabled by ACPI
pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
pci 0000:00:14.5: reg 0x10: [mem 0xfe8f9000-0xfe8f9fff]
pci 0000:00:14.5: System wakeup disabled by ACPI
pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
pci 0000:01:00.0: [1002:683d] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:01:00.0: reg 0x18: [mem 0xfe9c0000-0xfe9fffff 64bit]
pci 0000:01:00.0: reg 0x20: [io 0xc000-0xc0ff]
pci 0000:01:00.0: reg 0x30: [mem 0xfe9a0000-0xfe9bffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D1 D2 D3hot
pci 0000:01:00.1: [1002:aab0] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xfe99c000-0xfe99ffff 64bit]
pci 0000:01:00.1: supports D1 D2
pci 0000:00:03.0: PCI bridge to [bus 01]
pci 0000:00:03.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:03.0: bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:00:03.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:02:00.0: reg 0x10: [io 0xd800-0xd8ff]
pci 0000:02:00.0: reg 0x18: [mem 0xfeaff000-0xfeafffff 64bit]
pci 0000:02:00.0: reg 0x20: [mem 0xfdff0000-0xfdffffff 64bit pref]
pci 0000:02:00.0: reg 0x30: [mem 0xfeac0000-0xfeadffff pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:07.0: PCI bridge to [bus 02]
pci 0000:00:07.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:07.0: bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:00:07.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
pci 0000:03:05.0: [1106:3044] type 00 class 0x0c0010
pci 0000:03:05.0: reg 0x10: [mem 0xfebff800-0xfebfffff]
pci 0000:03:05.0: reg 0x14: [io 0xe800-0xe87f]
pci 0000:03:05.0: supports D2
pci 0000:03:05.0: PME# supported from D2 D3hot D3cold
pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0xe000-0xefff]
pci 0000:00:14.4: bridge window [mem 0xfeb00000-0xfebfffff]
pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x80000000-0xdfffffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff window] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 12 14 15) *0, disabled.
ACPI: Enabled 1 GPEs in block 00 to 1F
vgaarb: setting as boot device: PCI:0000:01:00.0
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009f400-0x0009ffff]
e820: reserve RAM buffer [mem 0x7ffb0000-0x7fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 32-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:02: [dma 0 disabled]
pnp 00:02: Plug and Play ACPI device, IDs PNP0400 (active)
system 00:03: [io 0x0e00-0x0e0f] has been reserved
system 00:03: [io 0x0e80-0x0e8f] has been reserved
system 00:03: [io 0x0f40-0x0f4f] has been reserved
system 00:03: [io 0x0a30-0x0a3f] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:05: [io 0x04d0-0x04d1] has been reserved
system 00:05: [io 0x040b] has been reserved
system 00:05: [io 0x04d6] has been reserved
system 00:05: [io 0x0c00-0x0c01] has been reserved
system 00:05: [io 0x0c14] has been reserved
system 00:05: [io 0x0c50-0x0c51] has been reserved
system 00:05: [io 0x0c52] has been reserved
system 00:05: [io 0x0c6c] has been reserved
system 00:05: [io 0x0c6f] has been reserved
system 00:05: [io 0x0cd0-0x0cd1] has been reserved
system 00:05: [io 0x0cd2-0x0cd3] has been reserved
system 00:05: [io 0x0cd4-0x0cd5] has been reserved
system 00:05: [io 0x0cd6-0x0cd7] has been reserved
system 00:05: [io 0x0cd8-0x0cdf] has been reserved
system 00:05: [io 0x0800-0x089f] could not be reserved
system 00:05: [io 0x0b00-0x0b0f] has been reserved
system 00:05: [io 0x0b20-0x0b3f] has been reserved
system 00:05: [io 0x0900-0x090f] has been reserved
system 00:05: [io 0x0910-0x091f] has been reserved
system 00:05: [io 0xfe00-0xfefe] has been reserved
system 00:05: [mem 0xffb80000-0xffbfffff] has been reserved
system 00:05: [mem 0xfec10000-0xfec1001f] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:06: [dma 0 disabled]
pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:07: [mem 0xe0000000-0xefffffff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:08: [mem 0x000c0000-0x000cffff] could not be reserved
system 00:08: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:08: [mem 0x00100000-0x7fffffff] could not be reserved
system 00:08: [mem 0xfec00000-0xffffffff] could not be reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 9 devices
clocksource acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:03.0: PCI bridge to [bus 01]
pci 0000:00:03.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:03.0: bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:00:03.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:07.0: PCI bridge to [bus 02]
pci 0000:00:07.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:07.0: bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:00:07.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 03]
pci 0000:00:14.4: bridge window [io 0xe000-0xefff]
pci 0000:00:14.4: bridge window [mem 0xfeb00000-0xfebfffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window]
pci_bus 0000:00: resource 8 [mem 0x80000000-0xdfffffff window]
pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff window]
pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:01: resource 1 [mem 0xfe900000-0xfe9fffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:02: resource 1 [mem 0xfea00000-0xfeafffff]
pci_bus 0000:02: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
pci_bus 0000:03: resource 1 [mem 0xfeb00000-0xfebfffff]
pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:03: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff window]
pci_bus 0000:03: resource 8 [mem 0x80000000-0xdfffffff window]
pci_bus 0000:03: resource 9 [mem 0xf0000000-0xfebfffff window]
NET: Registered protocol family 2
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
UDP hash table entries: 1024 (order: 3, 32768 bytes)
UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
microcode: updated early to new patch_level=0x010000db
Freeing initrd memory: 8740K (ffff880036ede000 - ffff880037767000)
microcode: CPU0: patch_level=0x010000db
microcode: CPU1: patch_level=0x010000db
microcode: Microcode Update Driver: v2.00 , Peter Oruba
LVT offset 1 assigned for vector 0x400
IBS: LVT offset 1 assigned
perf: AMD IBS detected (0x0000001f)
Scanning for low memory corruption every 60 seconds
futex hash table entries: 1024 (order: 4, 65536 bytes)
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1474786721.320:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 1600x900x32, linelength=6400, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90000800000, using 5632k, total 5632k
Console: switching to colour frame buffer device 200x56
fb0: VESA VGA frame buffer device
GHES: HEST is not enabled!
00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
ata1: SATA max UDMA/133 abar m1024@0xfe8ff800 port 0xfe8ff900 irq 22
ata2: SATA max UDMA/133 abar m1024@0xfe8ff800 port 0xfe8ff980 irq 22
ata3: SATA max UDMA/133 abar m1024@0xfe8ff800 port 0xfe8ffa00 irq 22
ata4: SATA max UDMA/133 abar m1024@0xfe8ff800 port 0xfe8ffa80 irq 22
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
ledtrig-cpu: registered to indicate activity on CPUs
hidraw: raw HID events driver (C) Jiri Kosina
NET: Registered protocol family 10
registered taskstats version 1
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
Magic number: 0:973:974
rtc_cmos 00:01: setting system clock to 2016-09-25 06:58:42 UTC (1474786722)
ata2: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata1: softreset failed (device not ready)
ata1: applying PMP SRST workaround and retrying
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-8: WDC WD10EADS-00L5B1, 01.01A01, max UDMA/133
ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA WDC WD10EADS-00L 1A01 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
sd 0:0:0:0: [sda] Attached SCSI disk
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1560K (ffffffff81f11000 - ffffffff82097000)
Write protecting the kernel read-only data: 14336k
Freeing unused kernel memory: 1612K (ffff88000166d000 - ffff880001800000)
Freeing unused kernel memory: 1288K (ffff880001cbe000 - ffff880001e00000)
systemd[1]: RTC configured in localtime, applying delta of 330 minutes to system time.
random: systemd urandom read with 12 bits of entropy available
systemd[1]: systemd 210 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX -IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ +SECCOMP +APPARMOR)
systemd[1]: Detected architecture 'x86-64'.
systemd[1]: Running in initial RAM disk.
systemd[1]: Set hostname to .
systemd[1]: Starting Timers.
systemd[1]: Reached target Timers.
systemd[1]: Starting -.slice.
systemd[1]: Created slice -.slice.
systemd[1]: Starting udev Kernel Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Starting udev Control Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Starting Journal Socket.
systemd[1]: Listening on Journal Socket.
systemd[1]: Starting Sockets.
systemd[1]: Reached target Sockets.
systemd[1]: Starting System Slice.
systemd[1]: Created slice System Slice.
systemd[1]: Starting system-systemd\x2dfsck.slice.
systemd[1]: Created slice system-systemd\x2dfsck.slice.
systemd[1]: Starting dracut cmdline hook...
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting Entropy Daemon based on the HAVEGE algorithm...
systemd[1]: Started Entropy Daemon based on the HAVEGE algorithm.
systemd[1]: Starting Journal Service...
systemd[1]: Starting Slices.
systemd[1]: Reached target Slices.
systemd[1]: Starting Setup Virtual Console...
systemd[1]: Starting Swap.
systemd[1]: Reached target Swap.
systemd[1]: Starting Local File Systems.
systemd[1]: Reached target Local File Systems.
systemd[1]: Started Create list of required static device nodes for the current kernel.
systemd[1]: Starting Create static device nodes in /dev...
sd 0:0:0:0: Attached scsi generic sg0 type 0
systemd[1]: Started Load Kernel Modules.
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Started Create static device nodes in /dev.
systemd[1]: Started Apply Kernel Variables.
systemd[1]: Started Journal Service.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ehci-pci: EHCI PCI platform driver
QUIRK: Enable AMD PLL fix
ehci-pci 0000:00:12.2: EHCI Host Controller
ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaround
ehci-pci 0000:00:12.2: debug port 1
ehci-pci 0000:00:12.2: irq 17, io mem 0xfe8ff000
[drm] Initialized drm 1.1.0 20060810
ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.1.31-30-default ehci_hcd
usb usb1: SerialNumber: 0000:00:12.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
scsi host4: pata_atiixp
[drm] radeon kernel modesetting enabled.
scsi host5: pata_atiixp
ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
ehci-pci 0000:00:13.2: EHCI Host Controller
ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaround
ehci-pci 0000:00:13.2: debug port 1
ehci-pci 0000:00:13.2: irq 19, io mem 0xfe8fa800
tsc: Refined TSC clocksource calibration: 3410.346 MHz
clocksource tsc: mask: 0xffffffffffffffff max_cycles: 0x31287bfa96e, max_idle_ns: 440795321849 ns
checking generic (d0000000 580000) vs hw (d0000000 10000000)
fb: switching to radeondrmfb from VESA VGA
Console: switching to colour dummy device 80x25
[drm] initializing kernel modesetting (VERDE 0x1002:0x683D 0x174B:0xA002).
[drm] register mmio base: 0xFE9C0000
[drm] register mmio size: 262144
ATOM BIOS: 113
radeon 0000:01:00.0: VRAM: 2048M 0x0000000000000000 - 0x000000007FFFFFFF (2048M used)
radeon 0000:01:00.0: GTT: 1024M 0x0000000080000000 - 0x00000000BFFFFFFF
[drm] Detected VRAM RAM=2048M, BAR=256M
[drm] RAM width 128bits DDR
[TTM] Zone kernel: Available graphics memory: 1024324 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 2048M of VRAM memory ready
[drm] radeon: 1024M of GTT memory ready.
[drm] Loading verde Microcode
[drm] Internal thermal controller with fan control
[drm] probing gen 2 caps for device 1022:960b = 1300c82/0
ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 4.1.31-30-default ehci_hcd
usb usb2: SerialNumber: 0000:00:13.2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ohci-pci: OHCI PCI platform driver
ohci-pci 0000:00:12.0: OHCI PCI host controller
ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
ohci-pci 0000:00:12.0: irq 16, io mem 0xfe8fe000
[drm] radeon: dpm initialized
[drm] GART: num cpu pages 262144, num gpu pages 262144
[drm] probing gen 2 caps for device 1022:960b = 1300c82/0
[drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
firewire_ohci 0000:03:05.0: added OHCI v1.0 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI PCI host controller
usb usb3: Manufacturer: Linux 4.1.31-30-default ohci_hcd
usb usb3: SerialNumber: 0000:00:12.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
ohci-pci 0000:00:12.1: OHCI PCI host controller
ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4
ohci-pci 0000:00:12.1: irq 16, io mem 0xfe8fd000
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI PCI host controller
usb usb4: Manufacturer: Linux 4.1.31-30-default ohci_hcd
usb usb4: SerialNumber: 0000:00:12.1
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 3 ports detected
ohci-pci 0000:00:13.0: OHCI PCI host controller
ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
ohci-pci 0000:00:13.0: irq 18, io mem 0xfe8fc000
ata5.00: ATAPI: SONY DVD RW AD-7260S, 1.61, max UDMA/100
ata5.00: configured for UDMA/100
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: OHCI PCI host controller
usb usb5: Manufacturer: Linux 4.1.31-30-default ohci_hcd
usb usb5: SerialNumber: 0000:00:13.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 3 ports detected
ohci-pci 0000:00:13.1: OHCI PCI host controller
ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6
ohci-pci 0000:00:13.1: irq 18, io mem 0xfe8fb000
scsi 4:0:0:0: CD-ROM SONY DVD RW AD-7260S 1.61 PQ: 0 ANSI: 5
scsi 4:0:0:0: Attached scsi generic sg1 type 5
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: OHCI PCI host controller
usb usb6: Manufacturer: Linux 4.1.31-30-default ohci_hcd
usb usb6: SerialNumber: 0000:00:13.1
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 3 ports detected
ohci-pci 0000:00:14.5: OHCI PCI host controller
ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 7
ohci-pci 0000:00:14.5: irq 18, io mem 0xfe8f9000
sr 4:0:0:0: [sr0] scsi3-mmc drive: 94x/94x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 4:0:0:0: Attached scsi CD-ROM sr0
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: OHCI PCI host controller
usb usb7: Manufacturer: Linux 4.1.31-30-default ohci_hcd
usb usb7: SerialNumber: 0000:00:14.5
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
firewire_core 0000:03:05.0: created device fw0: GUID 0011060000003e06, S400
[drm] PCIE GART of 1024M enabled (table at 0x0000000000277000).
radeon 0000:01:00.0: WB enabled
radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xffff8800796d0c00
radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0xffff8800796d0c04
radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0xffff8800796d0c08
radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0xffff8800796d0c0c
radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0xffff8800796d0c10
radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000075a18 and cpu addr 0xffffc90000835a18
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:01:00.0: radeon: MSI limited to 32-bit
radeon 0000:01:00.0: radeon: using MSI.
[drm] radeon: irq initialized.
usb 4-1: new full-speed USB device number 2 using ohci-pci
usb 4-1: New USB device found, idVendor=046d, idProduct=c52e
usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-1: Product: USB Receiver
usb 4-1: Manufacturer: Logitech
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.0/0003:046D:C52E.0001/input/input3
hid-generic 0003:046D:C52E.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:12.1-1/input0
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.1/0003:046D:C52E.0002/input/input4
hid-generic 0003:046D:C52E.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:12.1-1/input1
Switched to clocksource tsc
[drm] ring test on 0 succeeded in 1 usecs
[drm] ring test on 1 succeeded in 1 usecs
[drm] ring test on 2 succeeded in 1 usecs
[drm] ring test on 3 succeeded in 10 usecs
[drm] ring test on 4 succeeded in 4 usecs
[drm] ring test on 5 succeeded in 2 usecs
[drm] UVD initialized successfully.
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 1 succeeded in 0 usecs
[drm] ib test on ring 2 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] ib test on ring 4 succeeded in 0 usecs
[drm] ib test on ring 5 succeeded
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] DP-1
[drm] HPD2
[drm] DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
[drm] Encoders:
[drm] DFP1: INTERNAL_UNIPHY2
[drm] Connector 1:
[drm] HDMI-A-1
[drm] HPD3
[drm] DDC: 0x6570 0x6570 0x6574 0x6574 0x6578 0x6578 0x657c 0x657c
[drm] Encoders:
[drm] DFP2: INTERNAL_UNIPHY2
[drm] Connector 2:
[drm] DVI-D-1
[drm] HPD1
[drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
[drm] Encoders:
[drm] DFP3: INTERNAL_UNIPHY1
[drm] Connector 3:
[drm] DVI-I-1
[drm] HPD4
[drm] DDC: 0x6560 0x6560 0x6564 0x6564 0x6568 0x6568 0x656c 0x656c
[drm] Encoders:
[drm] DFP4: INTERNAL_UNIPHY
[drm] CRT1: INTERNAL_KLDSCP_DAC1
[drm] fb mappable at 0xD047A000
[drm] vram apper at 0xD0000000
[drm] size 5787648
[drm] fb depth is 24
[drm] pitch is 6400
fbcon: radeondrmfb (fb0) is primary device
Console: switching to colour frame buffer device 200x56
radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
radeon 0000:01:00.0: registered panic notifier
[drm] Initialized radeon 2.42.0 20080528 for 0000:01:00.0 on minor 0
PM: Starting manual resume from disk
PM: Hibernation image partition 8:5 present
PM: Looking for hibernation image.
PM: Image not found (code -22)
PM: Hibernation image not present or could not be loaded.
SGI XFS with ACLs, security attributes, realtime, no debug enabled
XFS (sda2): Mounting V5 Filesystem
XFS (sda2): Starting recovery (logdev: internal)
XFS (sda2): Ending recovery (logdev: internal)
systemd-journald[118]: Received SIGTERM from PID 1 (systemd).
random: nonblocking pool is initialized
systemd[1]: RTC configured in localtime, applying delta of 330 minutes to system time.
systemd-readahead[385]: Bumped block_nr parameter of 8:0 to 20480. This is a temporary hack and should be removed one day.
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
ACPI: Power Button [PWRF]
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (27 C)
wmi: Mapper loaded
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
MCE: In-kernel MCE decoding enabled.
EDAC MC: Ver: 3.0.0
AMD64 EDAC driver v3.4.0
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled
acpi-cpufreq: overriding BIOS provided _PSD data
IT8718 SuperIO detected.
parport_pc 00:02: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
input: PC Speaker as /devices/platform/pcspkr/input/input7
ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B07 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B0F (\SOR1) (20150410/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
r8169 0000:02:00.0 eth0: RTL8168c/8111c at 0xffffc90000328000, 00:30:67:07:59:a6, XID 1c4000c0 IRQ 27
r8169 0000:02:00.0 eth0: jumbo features [frames: 6128 bytes, tx checksumming: ko]
ppdev: user-space parallel port driver
sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
sp5100_tco: PCI Revision ID: 0x3a
sp5100_tco: failed to find MMIO address, giving up.
snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client
snd_hda_intel 0000:01:00.1: Force to non-snoop mode
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC888: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
snd_hda_codec_realtek hdaudioC0D0: dig-in=0x1f
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input8
input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input9
input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input10
input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input11
input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input12
input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input13
input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input14
input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input15
input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input16
input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input17
input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input18
input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input19
input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input20
input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input21
FAT-fs (sda6): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
floppy0: no floppy controllers found
work still pending
FAT-fs (sda3): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
Adding 2096444k swap on /dev/sda5. Priority:-1 extents:1 across:2096444k FS
EXT4-fs (sda7): mounting ext3 file system using the ext4 subsystem
EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
systemd-journald[390]: Received request to flush runtime journal from PID 1
audit: type=1305 audit(1474766943.344:2): audit_pid=635 old=0 auid=4294967295 ses=4294967295 res=1
systemd-journald[390]: File /var/log/journal/a0848146a8854c519ce698d28901e824/system.journal corrupted or uncleanly shut down, renaming and replacing.
systemd-journald[390]: Failed to set file attributes: Operation not supported
ip6_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
No iBFT detected.
bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
r8169 0000:02:00.0 eth0: link down
r8169 0000:02:00.0 eth0: link down
device eth0 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): br0: link is not ready
r8169 0000:02:00.0 eth0: link up
br0: port 1(eth0) entered forwarding state
br0: port 1(eth0) entered forwarding state
IPv6: ADDRCONF(NETDEV_CHANGE): br0: link becomes ready
NET: Registered protocol family 17
Bridge firewalling registered
Bluetooth: Core ver 2.20
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Ebtables v2.0 registered
fuse init (API version 7.23)
UDF-fs: INFO Mounting volume 'ASSASSINS_CREED', timestamp 2008/03/07 02:33 (114a)